Wooden Sea Kayak
By Stelios

Building a wooden sea kayak

Building a wooden sea kayak nowadays is a quite complex procedure.
To simplify the procedure a few companies/people offering free or paid building plans. That gives you at least a good starting point instead of designing everything from scratch.

To make the long story short I & my colleague Vasilis choose to build the CNC Vember Expedition sea kayak. It is a British style kayak.
The boat comes into two versions; the normal and the expedition. We did the second one which extends the length by 10% to 5.35m (17.53 feet) while maintaining the same beam and stability characteristics. The construction follows the Vember Build Manual, but with the transverse temporary forms spaced at 330mm rather than 300mm.

 

The length of the kayak is 5.35 meters, the beam roughly 54 cm and the weight around 20-21kg.
We've changed pretty much everything apart from the hull.

This is a short list of the things we've changed/added:

  1. Compeltely new rim/cockpit design with braces that give you superb fit (like those from NDK kayaks)
  2. We build completely from scratch the skeg, everything that goes with it apart from the wire of course
  3. The bulkhead behind the seat has a small angle in order to perform self rescues easily without the need to lift the whole boat in order to empty the water
  4. We've added 3 hatches from Kajaksport (including the rims) to match those from modern sea kayaks. Superb quality from Kajaksport and excellent fit on the wooden kayak. The deck has to be altered a lot to accommodate this as initial plans are without any from hatches.
  5. Deck fittings from Sealect
  6. From and rear kayak holds are custom made, with a tube-like system to flow easily the rope while stays on the deck without moving up and down
Wooden Sea Kayak

Who fits on the boat?

I'm 1.85cm tall and 84-88kg (depending the season!) and I am at the very maximum body type for the kayak. Ideally the boat is made for paddlers from 1.60 to 1.78m and no more than 80kg. The main problem of the boat for tall paddlers is that it doesn't fit shoe size bigger than 43. I've got a 45 and I had to paddle it without a shoe.
We will start building a new version of the boat for larger paddlers. Same hull but much higher deck to accommodate paddlers from 1.80m to 1.90 and up to 100+ kg. Hopefully that will be ready in the next 2 months. It is a pain to make the adjustments on the deck but we already spend hours brainstorming and we have decide what we'll do!
I had to paddle it with bare foot as mentioned above plus to use the bulkhead as a foot peg (much better anyway) to test it properly.

Wooden Sea Kayak
In the process of building the deck

First Test

I'm not a person who praise a kayak because I've build it or just bought it.....instead I have to paddle it to see how it performs in all conditions; from dead flat to 2+ meter waves.
I'm glad to report that on Crete you can find rough conditions most of the days thus testing the boat is not require to travel for a long time.

Conditions: relatively flat with occasionally winds up to 10 knots.

The kayak is super stable (primary stability). To give you a reference is more stable than the NDK Romany Surf, Explorer, P&H Cetus, Venrure JURA, North Shore Atlantic, Valley Etain etc. It is actually the most stable kayak I've ever paddled with a beam of 54 cm, quiet impressive. I've paddled over the years more than 60 different sea kayak designs.

Novice paddles will be able to paddle in conditions that they weren't comfortable before due to increased stability. The boat turns very good as well; its maneuverability is outstanding and I can only compare it with the Nigel Dennis Romany. I found it a tiny less responsive than the Romany but much faster.

Wooden sea kayak

I kept a speed of 5 knots in flat water during a roughly 90% of my strength sprint to give you an idea.

With its long waterline a strong paddler will be able to keep an average speed of 3.8-4 knots. Due to bloody COVID-19 virus I didn't had the time to do a long trip yet to check the average speed but once I'll do, I will update either this post or I'll publish a new one.

On sidewinds the boats weathercock a little bit, not too much but is noticeable. It was empty, however. The skeg is very effective and needs a tiny bit to keep the boat going straight.

During the next few days I will be paddling the boat more and will update the post, especially with plenty of wind & waves.

Stay tuned!

Eskimo roll
By Stelios

Which kayak day trip to select?

Which kayak day trip to select? To answer better this question you need to know roughly where your hotel is in Crete in terms of the map.
The easier way to determine this if you are not already in Crete, is to type in Google Maps your hotel name. Then zoom out until you see the whole island and you will get an idea about your location.
This is very important as to drive from one side to the island to the other you will need 6-7 hours one way. If you haven’t book your accommodation and you do need transport you need to stay in Heraklion as we pick up only from there.
Read more “Which kayak day trip to select?”

Sea Kayaking Greece
By Stelios

Sea Kayaking Greece: Sporades

With my daughter been just 5 years old by the time of this post and a very tight schedule due to work commitments; I was amazed that I’ve managed to get some time off during the last week of January. Reason being a sea kayaking trip in northern Greece with my friend George who lives in Athens. After getting the approval from my boss (= my lovely wife, Penny) I’ve packed quickly my gear & food for a week, got the tickets for the ferry from Crete to Athens and everything was ready.

Read more “Sea Kayaking Greece: Sporades”

weathercocking
By Stelios

Coping with wind from the side

In my experience the most efficient way to gain a good tracking is through use of either a skeg or a rudder. A skeg will perform much better in big waves as it is “staying” inside the water while rudder pedals will be a hell of a work to keep them in the proper position.
Over the years I found the most unreliable rudder pedals to be those from Smart Track as they tend to break easily once you start pushing a lot. I’ve replaced almost the majority in my kayaks with those from Sealect and found them excellent.

Read more “Coping with wind from the side”